976 – CORNER SHOWER SEAT
Site Location: Corner shower seat provides maximum space utilization. Comes in configuration shown (left handed). Can be changed to be right handed as required on site.
Features: All corners are radiused and ground smooth for safety and ease of cleaning. Extra return flange at front edge provides extra rigidity and comfort when lifting or lowering seat.
Materials: All stainless steel, one piece construction. Seat: 16 ga. stainless steel type 304 with #4 brushed finish. Hinge: 16 gauge stainless steel type 304 bright annealed. Support ledge and clip: 16 gauge stainless steel type 304 with #4 brushed finish.
Weight: 12 lbs. (5.4 kg.)
Dimensions: 2″H x 15.875″W x 15.875″L
Shipping Size: 2.5″H x 27″W x 17″L
Shipping Weight: 12 lbs. (5.4 kg.)
Installation: Mount seat 17″-20″ from floor. Mount clip as close to the corner as possible. Shower seats can only support the loads intended with proper use of anchors and in wall backing. Ensure wall struture meets local building codes and the architects specification. Shower seat will sustain a load of 300 lbs.
Maintenance: Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners.
Safety Warning: All shower seats must be installed by qualified trades persons. Installers must consult and comply with local building codes. Mounting hardware and other systems to be determined by contractor and installer pending specific structure, design, and conditions. All installations must be fully inspected and approved by property owners and maintenance personnel prior to seat being put into use. Failure to comply to proper installation procedure will void warranty and may result in malfunctioning or injury.