972 – FULL WALL MOUNTED SHOWER SEAT
Site Location: Barrier free design
Features: Compact flip up shower seat retracts out of way when not in use.
Materials: One piece phenolic top, 5/16″ (8mm) thick. Unit frame is fabricated from 1″ O.D. 18 gauge brushed finish type 304 stainless steel. Welded construction features full 360 degree welds on all joints. Support and flanges are also stainless steel with brushed finish.
Capacity: The shower seat will support a load of 360 lbs when properly installed. The shower seat is only as strong as the anchors and wall to which it is attached and therefore must be firmly secured in order to sustain the load(s) for which it is intended. We suggest installation by a qualified tradesperson.
Weight: 12 lbs. (5.4 kg.)
Dimensions: 29″H x 18″W x 16″D
Shipping Size: 5.25″H x 19″W x 22″L
Shipping Weight: 12 lbs. (5.4 kg.)
Installation: Mounting hole locations are for reference when providing in wall support.
Maintenance: Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners.
Safety Warning: All shower seats must be installed by qualified trades persons. Installers must consult and comply with local building codes. Mounting hardware and other systems to be determined by contractor and installer pending specific structure, design, and conditions. All installations must be fully inspected and approved by property owners and maintenance personnel prior to seat being put into use. Failure to comply to proper installation procedure will void warranty and may result in malfunctioning or injury.