941-FT – STOCK SERIES MIRRORS, FIXED TILT
Site Location: The 941 fixed tilt mirror is ideal for any barrier free location.
Features: Comes in bright annealed finish. Vandal resistant concealed mounting. Standard float glass with shock resistant primary back. Full galvanized back panel.
Materials: One piece 24 gauge stainless steel channel frame provides rigid assembly. Fixed tilt frame is one piece 20 gauge stainless steel.
941-1630FT: 16″w x 30″h, fixed tilt
941-1824FT: 18″w x 24″h, fixed tilt
941-1830FT: 18″w x 30″h, fixed tilt
941-1836FT: 18″w x 36″h, fixed tilt
941-2430FT: 24″w x 30″h, fixed tilt
941-2436FT: 24″w x 36″h, fixed tilt
*other sizes available as special order
Weight: Code 941-1824FT, 13 lbs. (5.5 kg.)
Installation: Position bottom of mirror 48″ (121) from floor. Positions may vary depending on size and the type of installation.
Maintenance: Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners. Cleaning of mirrors is very important. Solid soils such as paint, excess edge sealant, felt buttons, tape, or adhesives should be razor-bladed off. Cleaning solutions should be mild, and preferable not contain ammonia, vinegar, bleaches, or solvents. Cleaning solutions should be used to dampen the wiping cloth. Do not spray directly on mirror. Spraying directly on a mirror can allow material to run down and provide a source of edge contamination. Damaged caused by cleaning solutions are not covered under warranty.
Mirror Warranty: Frost Products Ltd is a leading manufacturer of mirrors for commercial and institutional installations. Frost offers vandal resistant channel frame, frameless, and Barrier free tilt designs. We offer standard float glass, tempered glass, laminated glass, and stainless steel face options. All Frost mirrors are covered under our standard complete product warranty. Mirror glass is conforming to GS12GD5A type 1B, guaranteed against silver spoilage for 10 years. Note; on tempered mirrors the tempering process may produce slight distortion in mirror reflection when viewed from a distance. Mirror back plate consists of shock resistant primary back combined with galvanized second back plate and vandal resistant mounting system. All stainless steel face mirrors use 20 ga. XL buff stainless steel reflective surfaces.