1003-SP “L” SHAPE SERIES GRAB BAR 1 1/4″ DIAMETER
- Brushed stainless steel
- Peened grip
- Easy to install snap on flanges with concealed mounting
- 90 degree bend provides horizontal and vertical bar to hold
- Stock sizes: 30″x30″, 32″x16″ L and R, 40″x30″ L and R (L indicates Left, R indicates Right – this can be determined by the direction of the bar horizontally mounted to the wall)
Materials: Snap flange is 12 gauge stainless steel with a full 360 degree bead weld to the 18 gauge stainless tubing. 1-1/4″ dia. stainless steel, peened finish on bar.
Installation Guidelines: All grab bars must be installed by qualified trades persons. Installers must consult and comply with local building codes. Mounting hardware and other systems to be determined by contractor and installer pending specific structure, design, and conditions. All installations must be fully inspected and approved by property owners and maintenance personnel prior to bar being put into use. Failure to comply to proper installation procedure will void warranty and may result in malfunctioning or injury.
Maintenance: Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners. For stainless steel please do not spray with any product containing bleach, acids, or chlorides, which can be found in many cleaning products such as toilet bowl cleaners. Use of these cleaning solutions may cause discolouration and if used for prolonged periods of time they can eat away at points in the stainless steel. If discolouration occurs, the use of an approved stainless steel cleaner and a firmer scrub pad, such as a Scotch Brite Pad #7447, may remove the markings. Wipe away any debris from the area and gently rub with the pad. Then spray the area with a stainless steel cleaner/polish and rinse and dry. Always wipe with the grain direction for stainless steel products. If a cleaning agent has begun to eat away at the steel on a unit then the unit will likely need to be replaced. The stainless steel that Frost Products uses is of high quality and stainless steel is resistant to rust. However, discolouration that appears to be rust can be caused by cleaning solutions and soaps mentioned above. It is important to discontinue use of any cleaning agent or soap if discolouration begins to occur. Clean off the discolouration as quickly as possible to avoid any permanent damage to the unit. Maintenance staff should be taught how to recognize the signs that they are not using the appropriate cleaning products and how to correctly maintain stainless steel items.
Individual Carton Shipping Dimensions:
1003-SP30”x30” – 32”L x 32”D x 5”H (81.3cm L x 81.3cm D x 12.7cm H)
1003-SP16”x32”L – 17”L x 33”D x 5”H (43.2cm L x 83.8cm D x 12.7cm H)
1003-SP16”X32”R – 17”L x 33”D x 5”H (43.2cm L x 83.8cm D x 12.7cm H)
Individual Carton Shipping Weight:
1003-SP30”x30” – 4.75lbs (2.15kg)
1003-SP16”x32”L – 4.25lbs (1.9kg)
1003-SP16”X32”R – 4.25lbs (1.9kg)
1003-SP30”x30” – 30”L x 30”D x 3.25”H (76.2cm L x 76.2cm D x 8.3cm H)
1003-SP16”x32”L – 16”L x 32”D x 3.25”H (40.6cm L x 81.3cm D x 8.3cm H)
1003-SP16”X32”R – 16”L x 32”D x 3.25”H (40.6cm L x 81.3cm D x 8.3cm H)
1003-SP30”x30” – 4.5lbs (2.0kg)
1003-SP16”x32”L – 4lbs (1.8kg)
1003-SP16”X32”R – 4lbs (1.8kg)